Kimbo Posted January 21, 2008 Report Share Posted January 21, 2008 Hi allI fitted the hayman reece hitch to the 200 today and I noticed the top bolt where the cams are was bent this is the 2nd one that has done this so I think people should check this just in case.You cant see the bend unless you remove the bolt from the hitch head. Replacements are readily available I just went to a TJM store and asked and bought a spare just in case but at $20 per bolt not cheap Im sure you could source cheaper but I needed it so cost didnt matter at the time Regards Quote Link to comment Share on other sites More sharing options...
Rosco Posted January 21, 2008 Report Share Posted January 21, 2008 I also found mine well bent, almost a U shape. I took it back ta a Hayman Reece dealer and they replaced it free.Rosco :thumbsup: Quote Link to comment Share on other sites More sharing options...
cvtripper Posted January 22, 2008 Report Share Posted January 22, 2008 Thanks Kimbo and Rosco,Come to think of it, I believe all HR products come with a lifetime warranty.I guess that would include the bolts.Just verified that is true on the HR website.http://www.haymanreese.com.au/index.htmClick on Warranty in the left menu (I hate frames....)David Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.