GraemeY Posted October 4, 2014 Report Share Posted October 4, 2014 I came across this bulletin from Webasto about quieting the ticking noise from the heater fuel pumps , i tried it on our Top Ender and it made quite a difference to the noise level , see bulletin attached pump noise.tiffIt consists of 2 parts as rubber fuel pump mounting attachment fuel pump mount.tiffand 2 rubber 90 degree elbowsrubber hose.tiffI also insulated the fuel line hose with rubber so that the noise from the fuel pump wasn't transmitted through the fuel line to the chassis , make sure the fixing points are at least 200mm from both sides of the pump , some Kedrons may allreeady have the rubber pump mount on them The cost of the rubber mounts are $28 and the elbows are $7 each plus postage for more info give me a call 0418130971 email gyost@toolstas.com.au Quote Link to comment Share on other sites More sharing options...
TonyH Posted October 4, 2014 Report Share Posted October 4, 2014 Thanks Graeme Quote Link to comment Share on other sites More sharing options...
ATV42 Posted October 23, 2014 Report Share Posted October 23, 2014 Hi Graeme.Thank you for that info. Could you please post some photos to explain the installation a bit better.Our pump is right under our front bed, and it drives me nuts, or maybe I'm already nuts!!!!!!!!CheersPete Quote Link to comment Share on other sites More sharing options...
GraemeY Posted October 25, 2014 Author Report Share Posted October 25, 2014 HI PeteThanks for the call the other day , a couple of things to do is firstly make sure any insulation you have put around the pump is not touching any metal , if it does it will transmit some noise through the chassis , check and see if you have one of the rubber mounts as shown in the picture , use 2 right angle rubber ends on the fuel pump inlet and outlet they need to be opposed in the direction ie 1 up 1 down see pic , also where the fuel line is attached to the chassis insulate with foam in a large p clip , i will attach some pictures so you get the idea , give me a call if you wish to discuss 0418 130971 Quote Link to comment Share on other sites More sharing options...
GraemeY Posted October 26, 2014 Author Report Share Posted October 26, 2014 SORRY ALL ELDERLY MOMENT CAN'T EVEN REMEMBER MY OWN PHONE NUMBER 0418 130971Admin edit: Graeme, I have amended your phone number in the above post as folk may not see this correction. Good luck with it all. Quote Link to comment Share on other sites More sharing options...
ATV42 Posted October 26, 2014 Report Share Posted October 26, 2014 Hi GreameThank you for the info, I'll give you a call next week,.Cheers.Pete Quote Link to comment Share on other sites More sharing options...
ATV42 Posted November 8, 2014 Report Share Posted November 8, 2014 Hi GraemeThose parts arrived yesterday, fitted to the heater pump and tested today. What a difference, NO more clicking noise coming into the van from under the bed. We're ready for next winter now!!!!!Thank you for your advice and speedy dispatch of my order. Well worth the money.CheersPete Quote Link to comment Share on other sites More sharing options...
GraemeY Posted November 8, 2014 Author Report Share Posted November 8, 2014 We aim to please , i came across this simple fix a few months ago it it works well so we now include it in all our self install kits , glad it works and thanks for the feed backRegardsGraeme Yost Quote Link to comment Share on other sites More sharing options...
Simmo55 Posted August 28, 2018 Report Share Posted August 28, 2018 Hi Graeme, Recived your kit recently and fitted easily and no more ticking heard inside the van. I can now sleep peacefully and be warm. Recomend this mod 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.