Jump to content


Ordinary Member
  • Posts

  • Joined

  • Last visited

  • Days Won


Everything posted by Rod

  1. Hi Rob when I set up the 3 lithium batteries I contacted Enerdrive and they were very helpful over the phone to help with calibration me being a dummy I messed it up so Enerdrive sent one of there field technicians over to sort it all out he was very good and very helpful and yes you are correct we are not getting 360 amp hours cheers Rod
  2. Christmas has come early 3 new lithium batteries landed on my front door Itechword 120x looking to put them to the test
  3. One hour north/ west of newcastle NSW Gresford / dunngog area If there is a few KOG. I will through my spite in I do a mean pork roast meet and great cheers Rod
  4. Camping weekend at Lostock Dam 7/3/2020 there will be entertainment there The locals come down from the hills for this weekend banjo 🪕 playing fiddle strumming mouth 👄 organ And a open mic 🎤 night crowd participant Bring some of these Throw a fishing pole 🎣 in and get 1 of theseLooking ford to a great weekend cheers Rod
  5. Has anyone installed lithium batteries I am thinking of going with itech world 3x120 any feedback or info would be great cheers Rod
  6. All good and thanks for the good advice on the cable size I was very low cash 💰 so a new 2600W inverter was out of the picture I had the 1000W Redarc in the shed from my old van when I go lithium batteries I am thinking of 3x120 itech world batteries have you got any info on them good or bad cheers rod
  7. Getting ready for lithium batteries in my Kedron 2013 AV2 3x300 solar Panels on the roof 60W Morningstar controller MPPT 60amp Enerdrive battery charger DC2DC Enerdrive 40+ charger all wired in 35mm cable Thanks to Tony’s great advice 35mm Cable is the go 1000W Redarc inverter as well so I think I am ready to go lithium batteries soon just need to convince the wife cheers Rod
  8. Rod

    Enerdrive dc2dc

    Thanks Tony would you have any pictures of your set up That you can post or send to me cheers Rod 0402153916
  9. I have just perched a 40amp dc2dc Enerdrive charger i am going to mount it in the boot next to the charger Has anyone ran cabling threw the drawbar and up into the boot any help or handy tips greatly appreciated cheers Rod
  10. Hi Merv when you installed your lithium batteries from itech did you have to reprogram your solar controller I have a tristar TS60 MPPT i assume you have the same cheers Rod
  11. Thanks Pete i do like to talk to people who test the products in the field unfortunately not to many reputable organization in newcastle area
  12. Ok thanks merv may be some one else can help me with permanent inverter institution My problem is the pins on the inlet socket will be live when the inverter is on How do I fix this problem cheers Rod
  13. Thanks Merv for the great info With you’re xantrex 1800 inverter did Kedron fit it and wire it in when the van was getting built OR was it fitted later when I fit my inverter i am wondering how to get the wires back inside to a change over switch cheers Rod
  14. Hi Pete when you up graded your solar Panels to 1040W how many Panels did you use and how did you wire them up Did you have to in stall a second solar regular Are you running a MPPT regular Cheers Rod PS only new to this bear with me ?
  15. Thanks Merv very keen to see how the lithium perform how much solar do you have on the roof is 2 batteries enough for all your needs when I replace mine I think I will do all 3
  16. That is very cheep for 120 lithium how long have you had them and you say my standard charging system will charge them ok do they need to be charged at 14.6v
  17. Is lithium batteries the way to go
  18. Is the Enerdrive combo 60 battery charger 1600 inverter a good product for the ATV cheers Rod
  19. Thanks for the info my 3 AGM are only 12 months old so I was looking at up grading the solar Panels i found some panels on line 300w i was keen on these because they fit in the mounting bracket all ready on the roof 670 wide cheers Rod
  20. My Kedron is 5 years old it has 3 solar Panel now each one is 135W I am thinking of up grading the Panels what would be the best bang for my buck Any help thanks the system charges 3AGM 120 batteries cheers Rod
  21. Ok thanks for the info not sure what to do just yet enderdrive is a possibility cheers Rod
  22. Sorry new to this i am looking for some one to repair my victron 12v/1600w/70a charger in the Newcastle area
  • Create New...