JOLYBE 5 Report post Posted August 22, 2017 Hi all Just asking-can l use a hi lift jack to do a tyre change instead of a trailermate jack? Cheers John Quote Share this post Link to post Share on other sites
TonyH 677 Report post Posted August 22, 2017 Hi John, i wouldn't think there would be a problem, as long as you are 'lifting ' the van at the factory fitted lifting points. Goes without saying that the jack is suitably rated and chock the wheels on the opposite side that your lifting. Stay safe? Quote Share this post Link to post Share on other sites
Rod and Mavis 76 Report post Posted August 23, 2017 Hi John. Under no circumstances use the trailer mate to jack a Kedron. They are only rated at 1 ton max capacity so unless you have a very small Kedron please don"use it. I will leave HI Lift comments to those that know :-) Cheers from the Kyd's Quote Share this post Link to post Share on other sites
Merv and Di 140 Report post Posted August 23, 2017 Do not use the bracing points that Kedron have installed unless they have been suitably braced and strengthened where they are welded to the main chassis rail. Cheers Merv. Quote Share this post Link to post Share on other sites
JOLYBE 5 Report post Posted August 28, 2017 Ok-thanks everyone for your replies. Quote Share this post Link to post Share on other sites
