McAndrew Posted October 6, 2020 Report Posted October 6, 2020 We are experiencing less water flow and water pressure when hooked up to mains water in caravan parks. I have been advised that it could be a partially blocked Shurflo Mains Pressure Regulator Water Inlet? Has anyone else experienced this problem? and if so, what are the remedies? Any advice and help would be greatly appreciated. regards Macca 1 1 Quote
Steve and Kez Posted October 6, 2020 Report Posted October 6, 2020 Hi Macca, We experienced the same issue and were told the same thing as you. So we replaced the inlet and had no change in result. We just put up with it now S & K 1 Quote
McAndrew Posted October 6, 2020 Author Report Posted October 6, 2020 1 hour ago, Steve and Kez said: Hi Macca, We experienced the same issue and were told the same thing as you. So we replaced the inlet and had no change in result. We just put up with it now Thank you S & K Quote
McAndrew Posted October 6, 2020 Author Report Posted October 6, 2020 Thank you, I have ordered a replacement, will see hoe not goes Macca Quote
Steve and Kez Posted October 11, 2020 Report Posted October 11, 2020 I would be interested to know if it improves or will you be like us and just ..................... "Go with the Flow" 😋 Quote
McAndrew Posted October 12, 2020 Author Report Posted October 12, 2020 No improvement, I am also told that the problem could be in the hot water non return valve but it cannot be gotten to from outside and is right behind the diesel heater so may have to "go with the flow" as well Quote
Jacky Jacky Posted November 6, 2020 Report Posted November 6, 2020 Not sure if this will help, but it’s worth a read - https://rvdaily.com.au/five-minute-mods-restore-your-caravans-water-pressure/ 1 Quote
TonyH Posted November 8, 2020 Report Posted November 8, 2020 Hi Ann, Great tip, but...... The water pressure regulators (in our vans) are completely different, but serve the same purpose. I am not sure if you can pull apart/overhaul the type fitted to Kedron’s. Happy to be proved wrong. Thanks for the contribution. Tony 1 Quote
McAndrew Posted November 9, 2020 Author Report Posted November 9, 2020 Thats right Tony, Kedron pressure reducing valves are the American Shurflo brand. I understand that they make a 65psi model as well, (the current Kedron models are set at 50psi) do you know of anyone that has fitted the 65psi one? and would the extra 15psi affect the internal plumbing in your view? regards Macca Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.