the crow and i
Ordinary Member-
Posts
130 -
Joined
-
Last visited
-
Days Won
3
Content Type
Profiles
Forums
Events
Documents
Store
Everything posted by the crow and i
-
Hi Nev Hi Nev Thanks for the reply, but I have an issue with the mudguard protrusion I would have to modify the guard as the cupboard is 520W x 550D x 795H Can you provide some pics? Regards Bryan
-
We have an ATV with the door at front end of the van. I have seen washing machines fitted a cupboard on the right as you come into the van and would like to do the same, but the mudguard protrudes into the cupboard. Do Kedron have a mudguard modification to allow the fitting of the washing machine?
-
Hi We have the same problem with the decals and I have tried to remove them with use of a hair drier with little success. How did you remove them? Cheers Bryan
-
Hi If you are still looking for an 18 footer we have an 2006 18'6" Topender for sale contact me. Bryan ccoaldri@bigpond.net.au
-
Hi Tony That’s the system, there is a motor on each wheel and it would be ideal for moving around my yard as the area I keep the van is tight. I have had a look at more pics. and don’t believe it will fit, I believe it will foul on the suspension. Cheers Bryan
-
Hi Has anyone had and experience with remote purpleline Caravan Movers? Cheers Bryan
-
Hi Laurie Any chance I could get a copy of the drawings? Bryan
- 8 replies
-
- tow bar failure
- chevrolet silverado
-
(and 1 more)
Tagged with:
-
Hi Laurie I can't open the attached Replacement Leaf Springs for the 2006 Chevrolet Silverado 3500.webarchive Bryan
-
Laurie I didn't buy them, I machined the retainers from solid blocks of steel. The retainers are bolted through the chassis with M10-1.5 class 8.8 bolts and have a 150 x 100 x 10mm backing plates. Each retainer also has an M10-1.5 class 8.8 bolt that passes through the block and the rear chain link. Cheers Bryan
-
G'day Merv The endorsement shouldn't be a problem locating an engineer may be. Thanks Bryan
-
Hi All I need to have a GVM upgrade on a Silverado 2500 HD any ideas on where I can have this happen? Bryan
-
After a lot of procrastination I bit the bullet and machined up my own couplings and must say I am very happy with the result.
-
Hi I do like your coupling and I will do the same. Where did you purchase the bits and pieces? Happy Days Bryan
-
Hi Danny where did you buy the 2" lift kit? Bryan
-
Hi Tony Change of plan not King Shocks now fox. I have spent hours on the net and this is the best deal I can find surprisingly it is a local company. The quote I received for Fox Shocks from Double Black Off Road Pty Ltd 17/150 Chesterville Rd,, Moorabbin VIC 3189 Ph: (03) 9553 0744, Email: sales@doubleblackoffroad.co 0-1"PERFORMANCE SERIES 2.0S MOOTHBODY RESERVOIR SHOCKS 980-24-959 Chevy Silverado 2500HD front 2 $425.00 $772.73 $850.00 0-1"PERFORMANCE SERIES 2.0 SMOOTHBODY RESERVOIR SHOCKS 980-24-955Chevy Silverado 2500HD Rear 2 $425.00 $772.73 $850.00 Freight: $0.00 $0.00 TOTAL $1,700.00 Cheers Bryan
-
Hi All Looking at upgrading the front shocks on my Silverado with a King Shocks 25001-184 Performance Shock Kit Performance Shock Kit. Any advice would be appreciated. Bryan
-
Hi Tony For output and remote start stop, but it must fit into the caravan generator box. Regards Bryan
-
Hi All I am looking to purchase a 3.5kw generator that will fit in the caravan box and the 3.5 kw AllSpark Inverter Generator will just fit without the slide. Accordingly I am looking for feed on the AllSpark . Cheers Bryan
-
-
Hi Neville Thanks for the tip, I will have the tub off in the next couple of weeks to fit a tray and canopy, with a bit of luck I may be able to find a location which will allow me to fit the pump and filters higher. Bryan
-
Hi Tony Dorman 904-124 Primer Fuel Filter Seal Kit Sold by Amazon Export Sales LLC $30.08 Billet Air Bleeder Screw for Fuel Filter Housing Sold by Gold Plug LLC Amazon $29.57 FASS T C10 095G Titanium Fuel Air Separation Sold by tadz eBay $843.26 FASS Complete Fuel Sump Kit STK550 Sold by swagperformancep… eBay $323.66 6.6L Duramax Fuel Filter Delete Sold by fj-auto eBay $50.15 I am aware the installations show the filters below the chassis with a tub but I'm hoping there is more room to move with a tray. Cheers Bryan
-
Hi Tony Thanks for the heads up on the primer seal, I have ordered a seal kit and will install it when I fit the fuel filter delete. My aim is to have two filters that I can access easily and do away with the original filter by fitting a FASS fuel air separator with a complete fuel sump kit and a Duramax fuel filter delete. This video is worth a look. https://www.youtube.com/watch?v=UHVm-c80qwg Happy days Bryan
-
,Hi Tony I have had a starting issue on 3 occasions, when the engine started it ran for about 30 seconds and stopped, then would not start again until I primed it at the filter. I have checked for leaks in the system but none are evident and I read an article (and now can’t find it) that referred to a valve in the in tank pickup system that relieves the pressure when the engine is shut down. From memory, I believe it stated that if that valve is faulty it will allow all the fuel in the line to drain back to the tank. I was planning to fit a second filter and the major holdup was the location and lingering in the back of my mind was the fact I would still have to remove the wheel and inner guard to access the initial filter. The installation of the Fass system will (I hope) eliminate all the issues. Cheers Bryan
-
Hi All I’m looking at the FASS GMC Duramax 165 GPH Flow Rate Titanium Series Fuel Air Separation system. Has anyone fitted one of these systems or had any reports as to its performance? Cheers Bryan
-
Hi All What is the regulation regarding the chain attaching points on the towing vehicle? Bryan